Ⅶ. Maintenance of power distribution system
The power distribution system is the power source of the knitting machine, and must be strictly and regularly inspected and repaired in order to avoid unnecessary failures.
1、Check the machine for leakage of electricity and whether the grounding is correct and reliable.
2、Check the switch button for any failure.
3、Check whether the detector is safe and effective at any time.
4、Check the money circuit for wear and tear and broken money.
5、Check the inside of the motor, clean the dirt attached to each part and add oil to the bearings.
6, to keep the electronic control box clean, inverter cooling fan is normal.
Ⅷ, stop the machine storage notes
According to the half-yearly maintenance procedures for machine maintenance and maintenance, adding lubricating oil to the knitting parts, adding anti-embroidery oil to the knitting needles and sinkers, and finally cover the machine with a needle oil-soaked tarpaulin and store it in a dry and clean place.
Ⅸ, machine accessories and spare parts of the inventory
Commonly used, fragile parts of the normal reserve is an important guarantee of production continuity. General storage environment should be cool, dry and temperature difference of the place, and regular inspection, specific storage methods are as follows:
1、The enforced storage of needle cylinder and needle disk
a) First of all, clean the syringe, put machine oil and wrapped with oil cloth, into the wooden box, so as not to bruise, deformation.
b) Before use, use compressed air to remove the oil in the syringe, and add needle oil when using.
2、Triangle enforced storage
Put the triangles into storage, store them in a box and add anti-embroidery oil to prevent embroidery.
3、Storage of needles and sinkers
a) New needles and sinkers should be kept in the original box
Post time: Aug-23-2023