you can follow these steps:
Observation: First, you need to carefully observe the operation of the circular knitting machine . Through observation, you can find out whether there are abnormal vibrations, noises or changes in the quality of the weaving during the weaving process.
Manual rotation: Stop the operation of the circular knitting machine then manually rotate the machine table and observe the needles on each needle bed. By manually rotating the needles on each needle bed, you can observe the needles on each needle bed more closely to see if there are any damaged or abnormal needles.
Use tools: You can use specialized tools, such as a handheld light or needle bed detector, to help find the location of bad needles. These tools provide better lighting and magnification, helping repair technicians more easily spot the location of bad pins.
Check the fabric: Check the surface of the fabric to see if there are any obvious defects or abnormalities. Sometimes, a bad needle will cause obvious damage or defects in the fabric. Inspecting the fabric can help determine the location of the bad needle.
Judgment by experience: An experienced repairman may be able to judge the location of the broken needle by observing subtle changes in the weaving process, or by touching and feeling. An experienced repairman is usually able to locate a bad pin more quickly.
Through the above methods, the maintenance master can quickly find the location of the broken needle on the circular knitting machine, so as to perform timely repair and replacement to ensure the normal operation of the circular knitting machine.
Post time: Mar-30-2024